new

Assembly includes:

• Utility grade wood pole mount
• 6" x 6" x 6' bayonet wood riser
• 6" x 6" wood bayonet adapter
• Upper antenna cage.
• Attachment hardware included

Our 12" x 6 1/2" stainless steel mount can be mounted in single, double or triple radio configurations with all hardware needed for easy installation on just about any pole. The four standoff posts provide easy installation of the PSU concealed behind the radio. Can be installed with 3/4" band straps or 3/8" threaded rod.

Universal Radio Mount Spec Sheet

Assembly Includes:

• Universal 3" to 7" Lower Mount
• 14 3/4" Upper Cage
• 3 Attachment Brackets
• Includes all Mounting Hardware

Attaches to pole with 3 band straps or through-bolt 3/4" threaded rod wood poles.

Flip-flop adapter allows use with multiple antenna types.

Attachment points for radome come standard

Secondary attachments for lower skirt available 

Single Arm Antenna Mount Spec Sheet

Our Side Arm Pole Mount comes with a 2” x 4’ pipe powder coated brown or grey. The standoff arm is 36” from the pole. It has a load capacity of up to 250 lbs supporting a wide range of antennas models up to 48”. Mounting hardware kits are included with ¾” x 2' hot dipped galvanized (HDG) all thread rod sized for all utility poles.

Side Arm Pole Mount Spec Sheet

This shroud hides the lower lower RRUS-32 equipment and cables. The shroud mounts directly to the Ericsson RRUS-32 Unit. Includes all mounting hardware to attach to the bottom of the RRUS-32 radio.

RRUS-32 Spec Sheet

AMMTec Consultants, PLLC Engineered Solution PDF

* Nut provided by Electric Tech Construction
* Approval of installation by AMMTEC
* Approval of installation to include

1. Documentation of Bolt
2. Documentation of Installation Pattern
3. Documentation of Minimum Rod Extension
4. Documentation of Installation Performed by A Certified Installer

* AMMTEC to provide summary letter of approval of installation inspection to municipality.

Allows nut to engage threaded rod above and below the baseplates's top plane 

Lower hex head height brings existing light pole standards up to code stating requirements of 1 protruding thread on existing poles and 3 protruding threads on new poles.

• Standard Disconnect with Top Mount for a PG&E Meter 
• Riveted Weather Sealed Strap Latch to Mitigate Meter Theft 
• Stainless steel mount provided with 3 banding locations 
• The Smart Meter (not included) Is Rated Up To 5A Operation.
• 3-Pin Receptacle
• Ground/Bonding Lug
  
• NEMA 3R Enclosure

Meter Mount Disconnect Spec Sheet

Our 14” wide (outside dimension) pole top mounts are sold as a 3-part complete assembly and a couple miscellaneous items included if needed. Each assembly includes all stainless-steel hardware needed to mount to the pole and conceal the antenna. The exterior of the skirt comes primer coat flat gray with UV protection.

The 3 main parts included with each assembly:

• Our Universal mounting base securely mounts from 3” to 11” wide poles.
• Our Universal 14 ¾”H upper cage works with most antennas, (optional upper drop-in star available for 1” center mount antennas)
• Choose your optional meter mount. (If needed)

All items can be customized if needed, but greatly add to lead times. Custom metal parts typically add 4+ weeks and custom ABS usually 6-10 weeks depending on the complexity of the mold needed.

Our Patent Pending Universal mount is designed to install on a wide variety of steel/wood poles and antennas. The pole top mount is designed to support a 14” wide cylindrical antenna. The outer two-piece clam-shell lower skirt is designed to conceal the mounting base. This pole top mount is also available with optional interior meter mount.

4G / 5G - Universal 14" Pole Top Mount & Long Skirt Spec Sheet

We created these at the request of a site acquisition company. Our shroud is 24” high and meets CA code to conceal equipment. 

 This pole-mounted shroud will conceal the Ericsson Dual Band Radio (4449 or 8843).  Refer to the technical specifications for measurements. The kit consists of 4 mounting bolts and the perforated shroud. 

The shroud is manufactured of perforated anodized aluminum with 60% open area to maximize airflow and minimize overheating of radio equipment.  The overall weight is 8 pounds.

The shroud is designed to be removable to allow maintenance personnel easy access to the equipment.

8843/4449 Mount & Shroud Spec Sheet

Our VZW Long Radio Mount with Shroud is designed to install on a wide variety of steel poles and wood pole sleds. The mount is designed to hold multiple radios all concealed within an aesthetically pleasing outer shell with venting on bottom, back and open top to maximize airflow and meet municipality ordinance concealment requirements.

5.5 Ft Radio Mount & Shroud Spec Sheet

Our 14” wide (outside dimension) pole top mounts are sold as a 3-part complete assembly and a couple miscellaneous items included if needed. Each assembly includes all stainless-steel hardware needed to mount to the pole and conceal the antenna. The exterior of the skirt comes primer coat flat gray with UV protection.

The 3 main parts included with each assembly:

• Our Universal mounting base securely mounts from 3” to 13” wide poles.
• Our Universal 14 ¾”H upper cage works with most antennas, (optional upper drop-in star available for 1” center mount antennas)
• Choose your optional meter mount. (If needed)

All items can be customized if needed, but greatly add to lead times. Custom metal parts typically add 4+ weeks and custom ABS usually 6-10 weeks depending on the complexity of the mold needed.

Our Patent Pending Universal mount is designed to install on a wide variety of steel/wood poles and antennas. The pole top mount is designed to support a 16” wide cylindrical antenna. The outer two-piece clam-shell lower skirt is designed to conceal the mounting base. This pole top mount is also available with optional interior meter mount.

4G / 5G - Universal 16" Pole Top Mount & Long Skirt Spec Sheet

Our 12” wide (outside dimension) pole top mounts are sold as a 3-part complete assembly and a couple miscellaneous items included if needed. Each assembly includes all stainless-steel hardware needed to mount to the pole and conceal the antenna. The exterior of the skirt comes primer coat flat gray with UV protection.

The 3 main parts included with each assembly:

• Our Universal mounting base securely mounts from 3” to 9” wide poles.
• Our Universal 14 ¾”H upper cage works with most antennas, (optional upper drop-in star available for 1” center mount antennas)
• Choose your optional meter mount. (If needed)

All items can be customized if needed, but greatly add to lead times. Custom metal parts typically add 4+ weeks and custom ABS usually 6-10 weeks depending on the complexity of the mold needed.

Our Patent Pending Universal mount is designed to install on a wide variety of steel/wood poles and antennas. The pole top mount is designed to support a 12” wide cylindrical antenna. The outer two-piece clam-shell lower skirt is designed to conceal the mounting base. This pole top mount is also available with optional interior meter mount.

4G / 5G - Universal 12" Pole Top Mount & Long Skirt Spec Sheet

Our 4415 / 4426 Radio Mount with Shroud is designed to install on a wide variety of steel poles and wood pole sleds. The mount is designed to hold a 4415 or 4426 on the front and a PSU on the back. All concealed within an aesthetically pleasing outer shell with venting on bottom, back and open top to maximize airflow and meet city ordinance concealment requirements. Additional space to accommodate (Optional) Fan Unit and four spacer plugs to the back of the radio if needed.

4415 Mount & Shroud Spec Sheet

ABS thermoformed shroud for either 2203 or 2205 radios 

Shroud mounts directly to radio chassis 

2203 / 2205 Shroud Spec Sheet 

Our 11' x 6" light weight aluminum sled mount comes with 3 standoff attachment arms and all galvanized hardware needed for installation. The two welded vertical unistrut rails provide easy installation of all equipment needed.

11' x 6" Wood Pole Sled Mount Spec Sheet